Render Repair Cost in Adelaide (2026): Patch or Re-Render?

Tradesperson stripping damaged plaster from a sagging ceiling before repair, exposing the substrate around a ceiling vent.

Filling and recoating a render crack in Adelaide usually costs $150 to $400. Cutting out drummy render and re-rendering runs about $60 to $130 per square metre. Once drummy or damaged patches spread across most of a wall, a full re-render usually works out cheaper than patch after patch.

Adelaide’s render takes a beating from hot, dry summers and clay soils that shift underneath the slab, so cracking and drumming show up for different reasons on different walls. A crack near a window might be movement. The same crack on a shaded south wall might be salt damp. Getting the cause right before quoting is what keeps a repair from failing again.

Table of Contents

How much does render repair cost in Adelaide?

The smallest job is a single hairline crack, filled and recoated for $150 to $400. The largest is a full re-render, which starts at about $45 per square metre for cement render before the old render comes off.

Job

What It Involves

Working Range

Hairline crack, filled and recoated

Open, fill with flexible filler, recoat

$150-$400 per job

Render patching by area

Localised damage, holes and crack repairs

$45-$90 per square metre

Cut out drummy render and re-render

Remove back to sound render, re-render, blend

$60-$130 per square metre

Full wall re-render

Strip and re-render an elevation

Cement $45-$65 per square metre, acrylic $60-$95, lime $55-$85, plus removal of old render (about $15-$35 per square metre)

Texture recoat after repair

Unify colour and texture across the wall

$30-$55 per square metre

Larger removal and re-render jobs

Repairs that also fix moisture or substrate damage

$1,500-$5,000 per job

A small crack or patch carries a flat per-job price, because setting up, cutting in, matching the texture and cleaning up take about the same time whatever the size. Once a job moves past a single patch, pricing shifts to the square metre so it scales properly with the area.

What is drummy render, and what does it cost to fix?

Tradesperson on scaffolding applying and finishing render near the eaves of a house.

Drummy render has lost its bond with the wall underneath. It sounds hollow when you tap it, and it has to come off, not get patched over the top. Expect about $60 to $130 per square metre to cut it out and re-render.

The tap test

Tap across the wall with a knuckle or the handle of a trowel. A solid wall sounds sharp and dense. A drummy patch sounds hollow and flat. We chalk the edges of every hollow area we find and photograph the whole wall before quoting.

Why the job grows once cutting starts

Removal has to go back to sound, well-bonded render, not just the bit that looks damaged. Once we cut in, the drummy area is usually bigger than what you could see or hear from outside, which is why the quoted area can grow slightly once cutting begins.

Can you glue it back?

No. Adhesive and filler bridge a gap, they don’t restore the bond between render and substrate. A drummy patch filled rather than cut out will drum again, often within months, because the underlying cause, moisture, movement or a poor original bond, is still there.

Some installers inject bonding agents behind drummy render to try to re-stick it without cutting it out. It can buy a little time on a small, dry area, but it’s not a fix we’d put our name to on anything beyond a minor patch, since the bond rarely holds as well as a proper cut-out and re-render.

Not Sure Which Render Is Right for Your Home?

We’ll help you choose the right render for your home and Adelaide climate.

Cracked render repair cost by crack type

Not every crack needs the same fix, and getting this wrong either wastes money on a full patch or leaves a structural crack under a cosmetic fill.

Crack Type

Usual Fix

Price Basis

Cause Check Needed?

Hairline crazing

Recoat or flexible coating

Priced per square metre of wall

No

Single crack under 1mm

Open, fill, recoat

Priced per lineal metre

No

Wider or reopening crack

Mesh-reinforced patch

Priced per lineal metre, higher rate

Yes, if it has reopened before

Stepped or diagonal cracks around windows

Fix the cause, then patch

Priced once the cause is confirmed

Yes, always

Stepped and diagonal cracks around windows point to movement in the wall, not just the render surface. Our guide on why render cracks on Adelaide homes covers what causes each crack type.

Hairline crazing is cosmetic and usually a curing or shrinkage issue, not a structural one, so it’s the one crack type on this table that rarely needs further checking before a straightforward recoat.

Falling or bulging render: why it’s urgent

Ceiling mid-repair showing taped and sanded plasterboard joints with the light fitting disconnected before reinstallation.

Render that is bulging or dropping pieces can fall on paths and people below. Fence off the area and get it made safe before doing anything else.

This matters most above front doors, over verandahs, along footpaths, on two-storey walls, and on parapets, anywhere a falling piece lands on someone rather than an empty garden bed.

A make-safe removal visit is priced per visit, not per square metre, since the job is securing the area fast rather than finishing the repair. Scaffold adds a separate site cost on any upper-level wall.

Render fails this way because a drummy section finally loses its last grip, often after a run of hot days followed by rain, or after vibration from nearby works. There’s rarely much warning between a wall sounding hollow and a piece actually coming away.

Render failing at the base of the wall? Check for salt damp first

In older Adelaide homes, render crumbling or bubbling along the bottom metre of a wall often means salt damp, not a simple render fault. Re-rendering over it without treating the cause fails again, usually within a year or two.

Signs to look for: white powdery deposits, render crumbling or bubbling at skirting height, and the problem showing up worse on south-facing or shaded walls, where render stays damp longest.

Salt damp treatment is priced and quoted as its own line item, separate from the render repair. See our salt damp treatment guide for methods and cost. Older solid-brick or stone walls are usually re-rendered in lime, not cement, once the salt damp is treated, since lime stays breathable. See our heritage building repairs guide.

Re-rendering straight over salt damp without treating it first is one of the most common repeat-repair calls we get. The new render looks fine for a season, then the same bubbling and crumbling comes back at the same height, because the salt is still moving up through the wall.

Patch or re-render the whole wall?

It comes down to how much of the wall is actually affected, and whether the same spot has failed before.

Condition

Best Move

One or two small hollow or cracked areas, rest sound

Patch, then recoat the wall

Drummy patches spread across the elevation

Re-render that wall

Same area failed before

Fix the cause, then re-render

Patch would sit mid-wall on a feature facade

Patch plus recoat the whole wall

A patch is cheaper up front, but it only makes sense when the rest of the wall is genuinely sound. Once drummy patches are spread across an elevation, or the same spot has already failed once, patching again just delays a job that needs doing properly.

Feature facades are the one case where the maths changes even for a single small patch. A mid-wall patch on a plain rendered wall can blend in reasonably well. On a feature facade with strong light or a fine finish, that same patch tends to stand out, so recoating the whole wall is usually worth the extra cost.

Will the patch show?

A small patch can be colour and texture matched closely, but it rarely disappears completely under close inspection. Recoating the whole elevation after patching is what actually hides the repair, since it unifies the colour and texture across the full wall rather than just the patched section.

What else affects your render repair price?

These extras sit on top of the core repair price and can shift a quote well beyond the job’s base rate.

Factor

When It Applies

Effect on Price

Height and scaffold

Upper storeys, parapets

Added as a site cost

Access

Tight side yards, shared walls

Can add labour time

Render type

Cement, acrylic, or lime

Lime and specialty finishes cost more

AAC panel walls

Hebel or similar panel construction

Different prep and bonding method

Texture and colour match

Any visible repair

Priced into the finish stage

Painting the whole wall

Repair plus full repaint

Quoted separately

Asbestos in old render

Homes built or renovated before 1990

Test before removal

Waste removal and minimum charge

Any job, however small

Applied as a standard site cost

Homes built or renovated before 1990 are likely to contain asbestos, according to SA Government guidance. Test before anyone cuts into old render, particularly around door and window reveals where older coatings were often layered.

Most of these factors can combine on the one job. A high feature facade on an AAC-panel home with matched texture and a full repaint afterward is a genuinely different price to a single ground-floor patch, even though both start as “render repair.”

Tradesperson on scaffolding applying and finishing render near the eaves of a house.

How Swart Plastering repairs render

A render repair follows the same process whether it’s one crack or a full elevation. Only the scale changes.

  1. We review your photos first, so we can scope roughly what we’re dealing with before the first visit.
  2. We run an on-site tap test across the suspect area and the surrounding render, not just the spot you noticed.
  3. We check for a cause, a leak, salt damp, movement or a failed original bond, before quoting the fix.
  4. We give you a written quote by area, so you know exactly what you’re paying for.
  5. We repair and match the finish, blending texture and colour into the surrounding render.
  6. We clean up and leave the site tidy.

Swart Plastering holds licence BLD 340471 and has hands-on experience across heritage and commercial render work in Adelaide.

Get an Exact Rendering Cost for Your Adelaide Home

Get a fixed quote based on your home. Not rough averages.

FAQs

How long does a render repair last?

A correctly repaired crack or patch should last as long as the render around it. A patch that fails within a year or two usually means the underlying cause wasn’t fixed first.

Mild, dry weather suits render repair best, since most renders need stable temperatures and low humidity to cure properly. Adelaide’s peak summer heat can dry a patch too fast and cause it to crack again before it’s fully cured.

Yes, but it needs different preparation and bonding products to a standard masonry wall, since AAC panels absorb and release moisture differently. Using a standard cement patch on a Hebel wall is a common reason repairs fail there.

A hairline crack filled with a flexible exterior filler is a reasonable DIY job. Anything involving drummy render, structural cracking or render above single-storey height is a job for a plasterer, both for the bond and for working safely at height.

Not always, a well-matched patch can sit unpainted if the existing paint is in good condition. But if the wall is due for a repaint anyway, doing it straight after the render repair means one job instead of two separate site visits.

Get a free render repair quote in Adelaide

If render is bulging or falling, fence the area off first. Then send us a few photos for a free, no-obligation quote, and we’ll tell you whether it needs a patch, a cut-out or a full re-render. Swart Plastering is licensed (BLD 340471) and works in cement, acrylic and lime render.

Request your free quote or call +61 440 138 673.